Civil war era dress - the jacket

I started this civil war area dress with the jacket.

As always with me and simplicity patterns, I cannot understand the instructions. I cut all the pieces from the main fabric and then I used quite strong linen I have tons off for the lining of the jacket. When I tried to combine together main back piece and the back side pieces they just would not. I tried to read the instructions and figure it out again but no help. So I just used my own imagination and aligned the pieces so that the arm wholes and the bottom part of the back fit and there is some overlap in the middle. I still think there was some clever trick how to give wearer a better mobility but I was not able to see it. Also, the pattern did not seemed to care too much about the lining and all the seams were left visible from the wrong side. Correct me if I am wrong but I honestly think the point of lining is to make the gown look gorgeous also from the inside. Therefore I again took some liberties from the pattern and combined pieces together so that all the seams are hidden.

Trying to figure out the back

I also had some great time adding the boning. This time, in contrast to my Robe ala Francais, I knew what I was doing and I made some nice tunnels for the boning plus I made sure that the sides are all well supported by tucktape (I haven't figured out any other easy way).

Back starts to come together

The next major thing were the sleeves. At this point I tried to follow the instructions and make the ruffles from the same fabric as the dress. I spent whole evening with that mess. The fabric was too stiff and too hard for that and I wasted many hours.

Next day I was off to a fabric shop again and my plan was to get similar color really light fabric that I could use to make ruffles. I was still really mad about all the edges that took hours. So, I decided to go with easy way out and buy quite expensive lace that I used for the sleeves. They had it on very limited amount so I did not managed to save anything for later part of the dress - all the lace I got when to the sleeves.

I also got the black ribbon and I started to like where this is going. It looked gorgeous and lace was easy to gather - no worrying about the edges.

When I used the white linen as lining for the bodice to keep it strong, I used that nice black lining fabric for lining on the sleeves.

The next step was the collar. I planned to use the organza with embroidery as the top layer of the collar. The middle layer or the main layer was the purple fabric and it had black lining on the other side. 

The main trouble with the collar was that the pattern had really small opening for the head. I was not sure if it was my sewing margin do I have larger neck that the pattern assumed.. I had to do a lot of fixing and I was really scared to cut too much or cut from the wrong place.

I first planned to have a purple ribbon with the same style as the black I used on the sleeves over the collar but I could not figure where it would be best - on the side of the collar or little bit inside and in the end I really started to love my collar without it. So, the ribbon was left out in the end.

Those pads were very funny. I have no idea what were their point. I just followed the instructions and sewed them in, being really worried that they will make the dress look weird. I am not sure if they made it better or if they had any effect at all. I think that they probably should have helped to compensate that at the front the top part of the jacket had a lot of space. If I had needed to fill those pads so that there is no space left, I would have needed much more than three layers of cotton batting inside.

Sleeves added to the jacket

Trying the jacket on the mannequin

When I had sewed the bodice and the sleeves together I tried it on the mannequin and tried it on myself and realized that I had not done it before and ofcourse, it did not fit. The waist was too small and I mean - I have very small waist. Because all of those waist seams had tunnels and boning it was horrible to undo it. I left it like that currently and hoped that when I wear the corset and I add the snap fasteners and buttons maybe it will be fine.

Next step: the bottom part of the jacket and uncharted territory as I had no guide nor no patter. I just improvised and at first it looked like I can pull it off. The front two panels were the ones I did twice. The bodice at the front has those really nice seams in the middle and I had hard time figuring out how to match them at the bottom part. At first try, I did not take them to account and I think it looked off without those seams. So, I remade the first panel so that it has those seams and it was much better. I used the black fabric for lining.

Next step was to sew bottom and top together and to make that "overlap" at the front to match was a trouble. It looked lovely (and I am confused why I do not have any photos of that on its own.

So, I left the jacket for a while and went to deal with the skirt.. and horrible meters of ruffles.
<<Previous|Next>>

Civil War area dress 1

At the end of last year I signed up for western style larp taking place in Czech republic. I was reallye xcited when I got my casting as I got to play high society lady and that meant I could do one of those fancy dress projects. The story takes place 1866 so I decided I will go with the civil war area dress as it should be almost fine. 

The LARP was inspired by TV series "Hell on Wheels" so my first source of costume ideas was from the tv series. I really loved Lily Bell on the show and would have loved to play her but its fine. Playing char (who to my knowledge has not been in the show) gave me more freedom to choose my costume. 

The costumes from the TV series were all very practical and quite simple. I do understand that as they were living in that wild west. So, I did not get any specific good ideas from shows screencaps.

I started with gathering some general idea of the dresses and fashion of the area. I first thought that I do not like those dresses or.. I loved ball gowns but for that kind of out door event I needed something more casual. I did a lot of sketching and I think I finally fell for the era's fashion when I saw photos of Ada's dresses from movie "Cold Mountain". I particularly fell in love with the following:

So that was my starting point. I loved the ornaments at the sides and I really wanted to add them.

Then I started to look for a pattern. At that moment I did not know that simplicity has almost perfect pattern (4900) for that costume and the pattern I found was 4510:

So, I did some sketching to figure out what exactly do I want. I went to the fabric shop with following sketches:

So, I decided to use the pattern I got and add the bottom part of the jacket myself. I tried different options for skirt but decided to go with layers of ruffles. I also decided not to make it as a dress but more like separate parts: jacket and skirt. As I had no idea what kind of weather awaits me at the start of May, I might have needed to add layers below the costume or I was worried it may be too hot to wear and I might want to remove the jacket and wear simple blouse under it.

I actually spent a lot of time finding suitable fabric. I went to different fabric shops and returned empty handed. I wanted something that wouldn't be very thin and would be strong. I wasn't sure about the color either. I love bordeux red but I was worried that on that time it would be more suitable for "other kind of ladies". The shot on the pattern was done using purple fabric. My boyfriend tried to suggest me dark blue. I was still amazed by that amazing green fabric I found for my robe ala francais dress. I was torn until I walked to that amazing purple fabric with amazing pattern and texture on the clearance sale. 70% off. Wow. It was very expensive fabric still but I thought it is perfect.

Fabrics used in the project

 The pattern also stated that i needed contrast fabric (I went with the black lining fabric I have used before) and organza for the sleeves. I managed to find amazing piece of organza with gorgeous embroidery that I used for the sleeves and decorative layer on the collar.

So, after the research I figured out I need the following pieces:

• Jacket
• Skirt
• Blouse with organza sleeves (pattern had the sleeves as stand alone but I wanted them to be connected to a blouse I could wear without the jacket)
• Underskirt
• Bonnet
• Corset
• Pannier

With the corset and the pannier I took the easy way out: I had that kind of cheap "made in China" wedding pannier on my costume stack. Actually, it was good choice as I needed to travel on plane and other girls were having horrible time managing to make their pannier fit into their luggage. With my "wedding pannier" I was able to wrap it around itself three times and fit it without troubles. I ordered a cheap white corset and first I planned to change the overall fabric on it as on the image it looked to be really reflective horrible white material. In the end, it came out, it was really nice and matte so I used it the way it was.
Next>>